Atomizing Humidifiers

Unlike Isothermal (boil water) humidifiers, Atomizing humidifiers can actually be used for humidification as well as cooling. This makes this product perfect for Data Centers of spaces with high sensible load. As you inject water vapor into the space, the energy used for moisture to absorb will create a cooling effect. Every lb or moisture is 12,000 btu of cooling!

 

Atomizing humidifiers will take water under high pressure to pass through multiple piezo orifice nozzles to produce an extremely fine mist. The droplets need to be as small as possible to float in the air long enough to be absorbed.

 

There are things to consider when applying this humidifier to your project. The absorption required is typically 4-6 feet. Additionally, because there is a cooling effect, if you are in a traditional humidification mode, you’ll need to offset the temperature drop by increasing your heat source.

 

Atomizing Humidifier are relatively simple in concept, only requiring a water treatment (DI/RO water) system and a high pressure pump. Units can precisely turn on and off as there is no boil and can modulate to very refined tolerances.

 

SYSTEM OVERVIEW:

Nozzles

  • Anti-drip nozzles produce droplets of less than 20µm. (Capacities of 6.6, 8.8 and11 lb/h (3, 4 and 5 L/h))

Generator

Intelligent Controller

  • Networkable (BACnet MS/TP), field configurable controller manages sequences of operation and provides close control for up to 4 stages and 3 zones.
  • Pre-filter and Silver Ion Cartridge (included with SKH100 and SKH200 models)
  • Water pre-treated with 5µm pre-filter and anti-bacterial silver ions prevent microbial growth.

High Pressure Water Pump

  • High efficiency, water cooled axial piston pump (maintenance free).

High Pressure Water Outlet

  • Ranges varying from 66 – 4638 lb/h (30 – 2108 kg/h) per pump station depending on model.

Pump

  • Sealed Oil, Maintenance Free w/VFD
  • Very high efficiency, small and compact

  • All stainless steel design

  • Water cooled

  • Axial piston pump

Controller

  • Extreme recirculation capability (up to 90%) without overheating

  • BACnet Capable
  • Fulfils most stringent hygiene requirements, such as VDI 6022

    Microprocessor based, field configurable controller

    • Real-time clock with flexible scheduler

    • Simple viewing and exporting of trending log

      and alarm log

      Select MAC address via menu or network

    • BACnet scheduler (up to 6 events)

    • Firmware upgradeable via network

  • In-field firmware upgradeable via micro

    SD card

  • LCD (128 x 64) with context-driven, userfriendly menu

HUMIDIFIER SECTION 

CONTACT US!